Aluminium Scooter Clamps

Over the past couple of months we have been working with a client on a new Scooter Clamp Design. Our goal from the client was that it needed to have "Clean,Angled, Crisp edges" We began modeling this up in our 3D CAD first of all getting the basic shape outlined and then began on the cut outs. After a few attempts and emailing back and forth with our client we achieved the goal. Next stage is making the part, we designed some holding fixtures to hold the part at the different stages of machining. Once we knew how we were going to hold it, we programmed the CNC Machine to perform the individual operations that were required to machine the part to completion. Machining was complete, so the next stage was to send it out for Anodizing, our client had already pre picked the colours from our samples.

Now back from Anodizing, the next job was to machine the Logo on to the part. Again a holding fixture was needed and a special order of small slot drills so we could get into the spacing between the letters. As you can see, a good result all around. For more information about us please visit our website and "Like" our Face Book Page for all the latest news, updates and offers.